11pngThe W8  cabinet is a dedicated coaxial stage monitor and operates on a frequency bandwidth of 60 Hz to 20 kHz.

The W8  enclosure contains a 1’ ’ exit polyester diaphragm compression driver providing  smoother response and lower harmonic distortion level as compared to other traditional metal diaphragm drivers used in similar size high frequency drivers,   co axially  mounted on  a 8’ ’ low frequency transducer in a bass-reflex tuned enclosure.

The coaxial transducer arrangement produces a 90° axi-symmetric directivity output along with a  smooth tonal response free of any secondary lobes over the entire frequency range.

By designing a state of the art passive crossover made of audiophile grade components we made sure you get a high feedback resistant monitoring with extreme sound precision.

Made of high grade Baltic birch plywood and coated with a scratch resistant water based textured paint, it ensures a long life in the harsh touring monitor world.

The W8 is pole mountable making it very usable for various portable PA applications.


Usable bandwidth (-3db):


Nominal directivity (-6db):
90 degree omni directional

System SPL:
121/124/127db cont/program/peak

Power handling capacity:
280W AES, 400W programe, 800W peak

Reccomended amplifier power:
300-400W* at 8ohm

8+1 inch coaxial

Nominal impedance:
Passive 8ohm


WxHxD 400x300x400mm,



Baltic birch plywood. Connectors: 2x Neutrik Nl4 Speakon

Black textured water based coating

* Program power is calculated as 3db higher then the AES power. Note that most of the modern electronic music does not allow high dynamics. For compressed music material we do not recommend using more then 300W of clean not clipped signal.