11pngThe W12  cabinet is a dedicated coaxial stage monitor and operates on a frequency bandwidth of 60 Hz to 20 kHz.

The W12  enclosure contains a state of the art neodymium 12’ ’ low frequency transducer with 3 inch voice coil and a triple demodulating ring providing extremely low distortion mounted in a bass-reflex tuned enclosure. .

Co-axially coupled with 1’ ’ exit annular ring polyester diaphragm compression driver exibits  smoother response and lower harmonic distortion level as compared to other traditional metal diaphragm drivers used in similar size high frequency drivers.

The W12  provides 80×60 degree directivity output along with a  smooth tonal response free of any secondary lobes over the entire frequency range.

By designing a state of the art passive crossover made of audiophile grade components we made sure you get a high feedback resistant monitoring with extreme sound precision.

Made of high grade Baltic birch plywood and coated with a scratch resistant water based textured paint, it ensures a long life in the harsh touring monitor world.

The W12  is pole mountable making it very usable for various portable PA applications.


Usable bandwidth (-3db):


Nominal directivity (-6db):
80×60 degrees

System SPL:
128/131/134db cont/programe/peak

Power handling capacity:
580W AES, 1000W programe, 2000W peak

Reccomended amplifier power:
600-1000W* at 8ohm

12+1 inch coaxial

Nominal impedance:
Passive 8ohm


WxHxD 500x340x440mm, Weight: 18.5kg


Baltic birch plywood. Connectors: 2x Neutrik Nl4 Speakon

Black textured water based coating


* Program power is calculated as 3db higher then the AES power. Note that most of the modern electronic music does not allow high dynamics. For compressed music material we do not recommend using more then 800W of clean not clipped signal.