The G218 cabinet is a high impact high output subwoofer that operates on a frequency bandwidth of 30 Hz to 200Hz.
The G218 enclosure contains two 18 inch 3600W program power handling low frequency transducers with100mm (4in) dual voice coils, equivalent to a single coil diameter larger then 152mm (>6in), providing exceptional power handling and extremely low power compression.
The G218 provides a pole mountable socket making it ideal for high output portable PA applications in combination with our G12 or G15 multipurpose boxes.
|Usable bandwidth (-3db):||32Hz-200Hz|
|Nominal directivity (-6db):||omni directional|
|Maximum system SPL:||145db|
|RMS handling capacity:||3600W AES, 7200W programe, 20000W peak|
|Recommended amplifier:||3600W-7200W* at 4ohm|
|Components:||18 inch low frequency transducer with 4 inch dual voice coil|
|Nominal impedance:||Passive 4ohm|
|Physical:||WxHxD 1160x580x750mm, Weight: 81kg|
|Material:||Baltic birch plywood. Connectors: 2x Neutrik Nl4 Speakon|
|Connectors:||2x Neutrik Nl4 Speakon|
|Finish:||Black textured water based coating|
Program power is calculated as 3db higher then the AES power. Note that most of the modern electronic music does not allow high dynamics. For compressed music material we do not recommend using more then 5000W of clean not clipped signal.8
Trade Descriptions Act:
Due to MM-acoustics policy of continuing improvement, we reserve the right to alter these specifications without prior notice. MM-acoustics is committed to refining state of the art sound reinforcement, combining in-depth product and field applications research with advanced manufacturing techniques. Every MM-acoustics product is built to the highest manufacturing standards and rigorously tested to ensure that it meets the performance criteria specified in the design.