G210 is a very high impact, high SPL box.
In a very compact and light weight enclosure of only 34kg it packs incredible 136db of peak SPL.
Fully equipped with premium BMS and 18Sound OEM components it can handle 700W AES, 1100W program power with 2000W of peak power handling.
Two 10 inch drivers handling the low frequency features a demodulating ring neodymium magnet structure, providing unparalleled low level of harmonic distortion.
HF is covered by a 1.75 inch voice coil 1 inch throat HF driver. The polyester annular ring cone makes it able to handle the lower frequency spectrum with much less stress then the standard dome shaped metal diaphragm but in the same time effortlessly provide the very high frequency sparkle making the HF very smooth sounding.
Its average sensitivity of 101db 1w/1m, combined with the high power handling makes it comparable in its maximum SPL capabilities with some of the horn loaded loudspeakers but with much smaller size and considerably lighter package.
Its operating frequency range covers the range between 65Hz and 20Khz with +/- 2db variation from 200Hz to 18000Hz using the factory specified processing.
| Usable bandwidth (-3db): | 65Hz-20KHz (G210 FIR DSP settings) |
| Nominal directivity (-6db): | 90×40 or 60×40 degrees |
| Maximum system SPL: | 136db |
| RMS handling capacity: | 700W |
| Recommended amplifier: | 700-1000W |
| Components: | LF: 2×10 inch drivers HF: 1×1 inch drivers |
| Crossover frequency: | 950Hz |
| Nominal impedance: | 8 ohm (16 and 4 ohm optional) |
| Rigging: | M10 flying points Flying hardware accessories available |
| Physical: | WxHxD 310x860x350mm, Weight: 34kg |
| Material: | Baltic birch plywood |
| Connectors: | 2x Neutrik Nl4 Speakon |
| Finish: | Black textured water based coating |
DOWNLOAD:
Trade Descriptions Act:
Due to MM-acoustics policy of continuing improvement, we reserve the right to alter these specifications without prior notice. MM-acoustics is committed to refining state of the art sound reinforcement, combining in-depth product and field applications research with advanced manufacturing techniques. Every MM-acoustics product is built to the highest manufacturing standards and rigorously tested to ensure that it meets the performance criteria specified in the design.